Castelle Office Direct OfficeDirect Storage Server User's Guide download pdf (Page 29)

STORAGE

ERVER

SER

’

UIDE

2. If a line like the one highlighted (TCP/IP -> Network card)

is not listed, then you need to install the TCP/IP by selecting

Add> Protocol>Microsoft>TCP/IP>OK.

3. With the TCP/IP entry highlighted, click on the Properties

button to bring up the TCP/IP Properties window. The IP

Address tab will be selected.

TCP/IP Properties

DHCP Client Configuration:

• Select the Obtain an IP address automatically radio button,

as shown above. If the DHCP Server in the Storage Server has

been enabled, it will now provide an IP Address and related

data to your PC when it boots.

• Restart your PC. (The DHCP client request is sent when your

PC starts.)

Static IP Address Configuration:

If your PC is already configured, no changes are required. If you

have just installed TCP/IP, select the Specify an IP Address

radio button, and enter:

• IP Address and Subnet mask (IP Address tab selected.)

• Default Gateway Address (on the Gateway tab).

These values need to be compatible with other devices on your

LAN. Each PC requires a unique IP Address (usually only the

last field is different), and the same Subnet Mask. The IP

Address range commonly used is 192.168.0.1 to 192.168.0.254,

with a subnet mask of 255.255.255.0.

The Gateway IP Address of your Router or Internet Gateway. If

you don't have either of these, leave the address at 0.0.0.0.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 40 41

No comments

Castelle Office Direct OfficeDirect Storage Server User's Guide Page 29