Castelle Office Direct OfficeDirect Storage Server Installation Manual download pdf (Page 19)

Sage Sage Intergy 7.00 Install Guide 1 - 7

Chapter 1: Operating System Infrastructure

3. The Internet Protocol Properties window is displayed.

For Sage Intergy 7.00, it is acceptable to use automatic setting to have an address

assigned by an external DHCP server. However, if the Sage Intergy server is also a

domain controller, or if the Sage Intergy Storage Server will be installed, then a static IP

address or a DHCP reservation is strongly recommended. In the case of a static IP

address, use the following settings in a typical environment:

• Subnet mask: 255.255.255.0

• Default gateway: 192.168.1.1

• Preferred DNS Server: 192.168.1.10

In a typical environment, use static addresses in the range between 192.168.1.10 and

192.168.1.30 for all server devices. Using these typical settings assumes that

192.168.1.1 is the address assigned to the network router, and that the Sage Intergy

database server is also the primary DNS and DHCP server. However, change the static

address ranges used to match the addresses that are allocated for use in the customer’s

computing environment as necessary.

4. Configure TCP/IP Offload so that it is disabled on all Sage Intergy servers. If the TCP/IP

Offload function is enabled in any version of Windows, Sage Intergy client connections

may be disrupted during normal operation. To disable TCP/IP Offload for Windows Server

2008, type the following text at the command prompt:

netsh int tcp set global chimney=disabled

Technicians must also disable this functionality for each individual network driver.

Although hardware vendors may provide different configuration mechanisms, in general

TCP/IP Offload is configured from the Device Management portion of the Server Manager

interface. Refer to the vendor documentation for your network interface if necessary.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 283 284

No comments

Castelle Office Direct OfficeDirect Storage Server Installation Manual Page 19