Castelle FaxPress Specifications Page 615

  • Download
  • Add to my manuals
  • Print
  • Page
    / 674
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 614
Interpreting LEDs Appendix B: Troubleshooting
B—3
3. Check the fuse. If the filament is broken, replace the fuse. If the fuse is
cloudy or discolored, replace the fuse.
Note: A spare fuse is provided by the factory in the tray in the middle of
the fuse holder. The FaxPress uses a 2 Amp, 250 Volt, SLO-BLO
fuse.
4. Replace the fuse housing.
5. Reconnect the power cord and power up the unit.
Interpreting LEDs
The Red Alert LED and the Green LED Do Not Flash after
Powering Up
You have plugged the power cable into the FaxPress but the LEDs do not flash:
Check the power cable connection. Make sure the cable is plugged into a
working power outlet.
Check the power supply. If you have a FaxPress 2500 or SBE, make sure that
you use the power supply that comes with the unit.
Check the power switch. If you have a FaxPress 5000, 7000, or 7500, make
sure the power switch is turned on.
Check the network connection. Connect the unit to a working network and the
“10BT” or “100BT” LED should turn on. If the LED is not on, try a different
power outlet.
Check to see if the FaxPress 5000, 7000 or 7500 fan is working. If the fan is
not working, try a different power outlet.
Check the 5000, 7000 or 7500 fuse. Disconnect power cord and check the
fuse in the unit’s power switch. Replace if necessary.
Page view 614
1 2 ... 610 611 612 613 614 615 616 617 618 619 620 ... 673 674

Comments to this Manuals

No comments